The operator station is designed to provide superior operator comfort for many different operators:
The comfortable seat has two suspension springs, fore-aft seat adjustment, and ComfortGlide suspension:
Foot pegs provide you with more foot placement options and act as convenient handles to remove and replace the foot platform.
NOTE: Foot pegs are standard on the Z530R and Z545R and an optional extra-cost kit on the Z515E and Z530M.
The dual beverage holder on the left fender and storage compartment on the right fender add convenience for the operator:
NOTE: A storage compartment cover is standard on the Z530R and Z545R.
12-V outlet is located within the storage compartment for the convenience of connecting a variety of electrical and electronic equipment.
The control console is located to the right of the operator station and includes the following:
A conveniently located fuel-sight window allows the operator to view the fuel level when approaching the vehicle from the front:
Mower deck cutting height can be adjusted from 1 in. (2.5 cm) to 4 in. (10.2 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance:
Motion control levers are shaped and located for operator comfort and ease of control.
The motion-control levers can be adjusted to two different height settings and nine different fore-aft settings:
Tracking adjustment can be made from the operator seat with the provided tool.
Safety interlocks help prevent operating in an unsafe way:
The park brake is conveniently located:
Brake-and-go logic:
Accel Deep Mower Decks are a 10-gauge, 0.135-in. (3.4-mm) stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:
Accel Deep Mower Deck size | Model | Mulching (optional) | Material collection (optional) |
48 in. (122 cm) | Z515E, Z530M | MulchControl system | 6.5-bu (230-L) two-bag Power Flowā¢ system |
54 in. (137 cm) | Z515E, Z530M | MulchControl system | 6.5-bu (230-L) two-bag Power Flow system |
60 in. (152 cm) | Z515E, Z530M | MulchControl system | Not available |
Deep mower-deck stamping delivers high productivity, which gets the job done fast. It allows room for the cut and suspended material to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:
Large discharge opening is both high and wide to handle more material:
Cleaning a mower deck is one of the most frequent maintenance activities. The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
A wash port and hose connector are provided to make cleaning the underside of the mower deck easy.
Accel Deep Mower Decks have strong spindle pockets to keep the blades aligned, even after years of tough service:
An optional 6.5-bu (230-L) Power Flow rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:
The MulchControl attachment for the 54A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect lawn material.
Advantages of mulching grass clippings include:
MulchControl is an innovative, simple design that is easy to use and maintain:
MulchControl is well-suited to the following mowing situations:
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps reduce the amount of material being discharged. Other times this could work as a disadvantage:
The Z530M and Z530R have a large 44.3-cu in. (726-cc) displacement engine with premium features that provide superior performance and reliability.
Experience plenty of power and torque to handle tough mulching, mowing, and bagging conditions with the 24-hp (17.9-kW) V-twin engine:
The engine speed lever and choke control lever are separate controls:
The engine area is open for visibility to important service points, making it easy to inspect and clean the engine.
The 4.5-gal. (17-L) fuel tank is easy to fill and has a sight-level window and dash-mounted gauge:
John Deere recommends the use of fuel stabilizer in gasoline. See Fuel-Protect for gasoline engines (8 oz [237 mL]) for more information.
The spacious operator station has been designed for comfort, visibility, and ease of use:
The ROPS and seat belt work in conjunction to provide a protective zone around the operator:
Foldable ROPS and retractable seat belt are standard equipment:
Model | Height at top of ROPS in fully raised position |
Z515E, Z530R | 70.1 in. (178 cm) |
Z530R, Z545R | 70.7 in. (179.6 cm) |
The attractive design includes a provision for light-emitting diode (LED) lighting:
NOTE: Lights are standard on the Z530R and Z545R and optional on the Z515E and Z530M.
A strong, welded steel frame provides solid, reliable support for the machine components and operator:
Strong frame is designed to accommodate a rear hitch that can be used to pull a variety of lawn equipment:
NOTE: The rear hitch is standard on the Z530R and Z545R and optional on the Z515E and Z530M.
Large front caster wheels provide a smooth ride and level cut:
Caster wheels turn easily on two maintenance-free sealed ball bearings for both the spindles and the wheel axles:
Rear tires have high-quality tread and optimum size for superior traction and smooth ride:
Dual unitized transmissions efficiently power the ZTrakā¢ mower forward and reverse and provide steering capability:
Tow-valve controls are provided for each transmission and are located on the transmission near the expansion tanks:
Motion control levers are shaped and located for operator comfort and ease of control.
The motion-control levers can be adjusted to two different height settings and nine different fore-aft settings:
Tuff Torq is a trademark of Kanzaki Kokyukoki Mfg. Co., Ltd.
A convenient service interval decal provides basic maintenance information:
The engine is easy to service and takes a minimal amount of time:
The footrest area is removeable without tools to easily access the mower deck for service:
Accel Deepā¢ Mower Decks have features that make them easy to service:
Tracking adjustment can be made from the operator seat with the provided tool.
Limited bumper-to-bumper warranty for new turf and utility equipment (U.S. and Canada only):
Compare the specifications of up to 4 models
Key Specs | z530m-ztrak-mower-48-in Current Model |
---|---|
Engine power | 24 hp 17.9 kW |
Engine model number | FR730V |
Forward speed | 0-8 mph 0-12.9 km/h |
Front caster tires | 13x6.5-6 |
Drive tires | 22x9.5-10 |
Seat back height | High back with armrests and ComfortGlideā¢, 20 in. 50.8 cm |
Width of cut | Accel Deepā¢ mower deck, 48 in. 122 cm Accel Deep mower deck, 54 in. 137 cm Accel Deep mower deck, 60 in. 152 cm |
Mulching system | Optional MulchControlā¢ attachment, 48 in. 122 cm Optional MulchControl attachment, 54 in. 137 cm Optional MulchControl attachment, 60 in. 152 cm |
U.S. warranty | 4 year or 300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine | |
Power | 24 hp 17.9 kW |
Model number | FR730V |
Displacement | 44.3 cu in. 726 cc |
Cylinders | V-twin |
Lubrication | Full pressure with replaceable filter, capacity, 2 U.S. qt 1.9 L |
Type | Overhead valve |
Battery | 12 V 300 CCA |
Choke/speed control | Separate control levers |
Cooling method | Air |
Fuel tank capacity | 4.5 U.S. gal. 17 L |
Fuel gauge | Electric gauge and fuel level sight line |
Drive train | |
Dual hydros | Tuff TorqĀ®Ā TZT7-U with 1-in. (2.5-cm) axles |
Hydraulic pumps | |
Wheel motors | |
Travel speed | |
Forward speed | 0-8 mph 0-12.9 km/h |
Reverse speed | 0-4 mph 0-6.4 km/h |
Speed and direction control | Twin premium levers |
Control adjustment | 2-height/9-fore-aft, 18 positions |
Chassis | |
Frame | Heavy-duty frame tubing |
Primer/paint | E-coat/powder |
Front caster tires | 13x6.5-6 |
Front caster bearings | Sealed ball bearings |
Drive tires | 22x9.5-10 |
Hourmeter | Yes |
Service interval decal | Yes |
Storage compartment | Yes |
Cup holder | Yes |
Seat | |
Seat back height | High back with armrests and ComfortGlide, 20 in. 50.8 cm |
Fore-aft adjustment | While seated, 3 in. 7.6 cm |
Seat suspension | Two springs and ComfortGlide |
Lift system | |
Type | Foot lift |
Mower cut height | 1-4 in. 2.5-10.2 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | Yes |
Mower deck | |
Width of cut | Accel Deep mower deck, 48 in. 122 cm Accel Deep mower deck, 54 in. 137 cm Accel Deep mower deck, 60 in. 152 cm |
Type | Side discharge |
Mower deck material | 10 gauge 0.135 in. 3.4 mm |
Mower drive system | V-belt |
PTO | |
Type | Electric, 105 lb-ft 142.4 Nm |
Drive | V-belt |
Dimensions | |
Wheelbase | 49.2 in. 125 cm |
Overall length | 76.9 in. 195.3 cm |
Width without mower | 46.6 in. 118.4 cm |
Width with mower | 48A - 62.8 in. 159.5 cm 54A - 68.6 in. 174.2 cm 60A - 73.4 in. 186.4 cm |
Width with mower (deflector raised for storage) | 48A - 54 in. 137 cm 54A - 59.7 in. 152 cm 60A - 65.6 in. 167 cm |
Height | 47.6 in. 121 cm With rollover protective structure (ROPS) up position - 70.1 in. 178 cm |
Weight | With mower and fuel, 48A, 772 lb 351 kg With mower and fuel, 54A, 780 lb 355 kg With mower and fuel, 60A, 788 lb 358 kg |
Operation | |
Rollover protective structure (ROPS) | Yes |
Slope operating limit | 15 degrees, 10 degrees with an MCS |
Operator presence system | Yes |
Park brake interlock | Yes |
Operator video | Yes |
Buyer's notes | |
Note 1 | Mower wash port makes cleaning the deck easier |
Note 2 | Flip-up foot platform for easy service access |
Note 3 | 18-position adjustable motion-control levers |
U.S. warranty | 4 year or 300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional attachments | |
Mulching system | Optional MulchControl attachment, 48 in. 122 cm Optional MulchControl attachment, 54 in. 137 cm Optional MulchControl attachment, 60 in. 152 cm |
Rubber floor mat | Foot platform only |
Sun shade | Optional |
Mounted sprayer | No |
Storage cover | No |
Light kit | Optional 4-point LED Light kit |
Material collection system | Power Flow rear bagger, 6.5 bu 230 L Not available on 60A |
1Offer valid on qualifying purchases made 26 October 2024 through 03 February 2025. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 0% APR is for 36 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, will be 23.0% APR (as of 01 November 2024). Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.
2Offer valid on qualifying purchases made 26 October 2024 through 03 February 2025. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 4.9% APR is for 60 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, will be 23.0% APR (as of 01 November 2024). Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.
3Offer valid on qualifying purchases made 26 October 2024 through 03 February 2025. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. Interest will be charged to your account from the purchase date at 17.90% APR if the purchase balance is not paid in full within 9 months or if your account is otherwise in default. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.
1Free Delivery offer is available on the following new products when purchased directly through the John Deere Buy Online site from participating John Deere dealers in the United States between 26 October 2024 through 03 February 2025: 100 Series Lawn Tractors, 200 Series Lawn Tractors, Select Seriesā¢ X300 Lawn Tractors, Select Seriesā¢ X500 Lawn Tractors, X700 Signature Series Tractors, Z300, Z500, and Z700 Zero-Turn Mowers, Commercial Walk-Behind Mowers, QuikTrakā¢ Stand-On Mowers, Z900 Series ZTrakā¢ Zero-Turn Mowers, Gatorā¢ Utility Vehicles, and 1, 2, 3, and 4 Series Compact Tractors. Delivery not available from all dealers. Free Delivery is limited to 15 miles, as calculated in the 'Select a Dealer' screen, from participating dealers. Beyond the 15-mile limit for Free Delivery, a delivery credit, not to exceed $100 USD, is available from participating dealers. See the 'Select a Dealer' screen to find a participating dealer in your area. Valid in the U.S. only.
The Power Flow chute is required, along with the high-performance Power Flow blower, to use the 2-bag Power Flow material collection system. The chute includes a convenient handle and a fill indicator that tells the operator when the bags are getting full.
One chute works with several vehicle applications. Trim lines on the chute are referenced in the instructions so the chute can be cut to the proper length for the vehicle/mower application.
The high-performance (HP) Power Flow blower assembly for the 48-in. (122-cm) Accel Deepā¢ Mower is used with the hopper and chute to provide a very effective material collection system. A 6.5-bu (229-L) hopper and chute must be ordered separately to complete this material collection system.
The high-performance (HP) Power Flow blower assembly for the 54-in. (137-cm) Accel Deepā¢ Mower is used with the hopper and chute to provide a very effective material collection system. A 6.5-bu (229-L) hopper and chute must be ordered separately to complete this material collection system.
The optional rear bumper bolts to the ZTrakTM tubular frame for solid support:
This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:
Includes a choice of battery connection methods:
Foot pegs are standard equipment on the ZTrakā¢ Z740R, Z530R and Z545R Mowers and optional field-installed kits on E and M Series. They provide the operator with more foot-placement options:
Specifications
Item number | LP63764 |
Compatible mowers | ZTrak 48-in. (122-cm) and 54-in. (137-cm) Accel Deep Mower Decks |
Installation time | 15 minutes |
Shipping weight | 15 lb (7 kg) |
Warranty | Two-year consumer warranty |
Customers, please contact your local John Deere dealer for availability and pricing information.
ZTrak grass groomer - lawn striping kit
Order number: LP63764
The jack allows for easy access to the underside of the mower for maintenance or blade changing while in the field. The kit contains everything necessary to install the jack onto the front of a mower.
Holes in the vehicle frame cross member are pre-drilled for ease of installation:
The light kit includes a four-point LED lighting system and required installation components to provide additional lighting when needed.
The John Deere MowerPlus deluxe smart connector wirelessly links some 100 and 200 Series Tractor models and Z500 Series ZTrakā¢ Mowers to the MowerPlus app on a mobile device:
Equipment features available for viewing on the MowerPlus app include:
The operator is able to visit their deviceās app store to see new app features as they are added.
Since the smart connector communicates instrument cluster information, future app releases will provide additional operating recommendations and notifications.
One end of the wiring harness plugs into the back of the fuel gauge. The other ends plug into the smart connector and the tractor's wiring harness. The Z500 Mowers come with a dedicated connectivity connector, so the new wire harness is not needed.
MowerPlus deluxe smart connector (BUC10929) is for use with the following lawn tractors and ZTrak Mowers:
The MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile deviceās app store.
NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile deviceās app store.
Bluetooth is a trademark of Bluetooth SIG, Inc.
The string trimmer mounting kit is designed to carry a string strimmer on the machine. It is designed to fit most string trimmers with straight shafts. The main bracket fits over the right-side fender, and the secondary bracket mounts to the caster arm on the discharge side of the machine. Rubber straps are provided to secure the trimmer in place. The mount is not compatible with a complete material collection system.
The yard tool kit provides the ability to carry yard tools such as a rake or shovel on the machine.
The kit consists of one complete bracket and is designed to be mounted on the left side of the rear engine shroud and machine frame.
The toolbox kit provides easy access and convenient storage for small, hand-held tools:
The trash receptacle kit enables trash pickup and storage without the need to leave the mower seat. It includes everything needed:
A mounting bracket keeps the bucket out of the way and is designed to be mounted opposite the trim side of the mower:
Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
Wheels are mounted on a solid, one-piece axle for durability.
Iron and OiliteĀ® wheel bearings with grease fittings provide lubrication for long life.
The pneumatic tires offer the following:
A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
A large-diameter hitch pin provides plenty of strength:
An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrakā¢, ZTrakā¢, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
10PX | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump* | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
7P |
8Y |
10P |
10PX |
13 |
16YS |
17P |
18 |
21 |
|
Box capacity | |||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) |
17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) |
14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump* | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | |||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) |
39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) |
58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) |
15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) |
0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) |
14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) |
39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 180 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 91 lb (41.3 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 84 lb (38 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
Model | 7P | 8Y | 10P | 10PX | 13 | 16YS | 17P | 18 | 21 |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R |
X | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180 |
X | X | X | X | X | X | X | X | |
S220, S240 | X | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 |
X | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | X | |||||
G110 | X | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 |
X | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 |
X | X | X | X | X | X | X | X | X |
Please contact a local John Deere dealer for availability and pricing information.
7P Poly Utility Cart
Order number: LP21935
Oilite is a trademark of Beemer Precision, Incorporated.
Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.
Utility carts can be used to haul a variety of materials:
The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:
A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrakā¢, ZTrakā¢, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
10PX | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump* | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, 200 Series, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
7P |
8Y |
10P |
10PX |
13 |
16YS |
17P |
18 |
21 |
|
Box capacity | |||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) |
17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) |
14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump* | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | |||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) |
39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) |
58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) |
15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) |
0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) |
14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) |
39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 180 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 91 lb (41.3 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 84 lb (38 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
Model | 7P | 8Y | 10P | 10PX | 13 | 16YS | 17P | 18 | 21 |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R |
X | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180 |
X | X | X | X | X | X | X | X | |
S220, S240 | X | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 |
X | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | X | |||||
G110 | X | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 |
X | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 |
X | X | X | X | X | X | X | X | X |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
10P Poly Utility Cart
Order number: LPPCT10JD
Oilite is a trademark of Beemer Precision, Incorporated.
Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.
Can be used for:
The rear hitch provides towing capability for ZTrakā¢ Mowers:
Fits John Deere equipment tow behind attachments.
Customers, please contact your local John Deere dealer for availability and pricing information.
Magnetic hitch pin
Order number: LP63768
Allows tractor to meet restrictions imposed by certain areas.
The weight kit includes a weight bracket and four 18-lb (8.2-kg) weights for installation on the front of a Z500 Series ZTrakā¢ Mower. Quick-pull pins hold the weights securely in place while providing easy installation and removal.
NOTE: The weight kit components are also included in the 6.5-bu (229-L) rear bagger attachment.